As Releasing and Sony Ericsson Wireless Flash

As Releasing and Sony Ericsson Wireless Flash
The following will detail a number of ways that exist to release and / or unlock Sony Ericsson cell. It's easy and fast just to be patient and very careful and above all know well what we do.


Releasing the programme SEMC Tool
To unlock Sony Ericsson cell all that is needed is the USB Smart SEMC tool and obviously the USB cable. If you do not have this cable or want to unlock various types of cell, can be bought on the Internet such as cable adapters Cruiser 1 in 4 that come with several different chips for cellular.

What models can be unblocked with this program?
The 5.0 version supports the following models:
D750i, F500i, K300i, K300c, K500i, K500c, K506c, K508i, K508c, K700i, K700c, K750i, K750c, S700i, S700c, S710a, V800, V802SE, W800i, W800c, Z500a, Z500i, Z500c, Z520i, Z520c, Z800i, Z800c, Z1010i, Z1010c
A2218z, A2228z, A2618s, A2618sc, A2628s, A2628sc, A2638sc, A2668sc, P800, P802, P900, P907, P908, R520m, R520mc, T200, T202, T20e, T20ec, T20s, T20sc, T226, T226s, T230, T237, T238, T290i, T290c, T290a, T300, T302, T306, T310, T312, T316, T39m, T39mc, T610, T616, T618, T628, T62u, T630, T637, T65s, T65sc, T68i, T68i, T68m, T68mc, Z600, Z608
A3618s, A3618sc, T100, T102, T105, T106, Z200, Z208, J200i, J200c

Recommendations:
Before beginning is recommended that the phone battery fully charged and that this never disconnect the wire while in this process of liberation because it can cause irreparable damage. I have no responsibility for any damage to its full responsibilities is d.

As unlock:
1) Be sure to take all the driver of the USB cable installed correctly
2) Connect the cable to the cell. There must be switched off and without the SIM card
3) Open the program USB Smarts SEMC tools
4) In the "Phone" select model of your cell
5) The fields "Interface", "COM port" and "Bautdrate" having to set depending on the cable and you have the COM port in this installed.
6) Now clickias pressing the "Unlock" if it is not already active.
7) Tilden option "Clear SP Locks"
8) Finally you give to the button "Do Selected Jobs"
9) The program detected the cell and then it's unlocked.

Releasing and flash with the program GOT
Supported Cable: Cable Service
With the program GOT (original) is possible:
Settings
Interface type: select the port.
Language: select the language program.
Handset type: select the phone.
Get handset identificators: obtaining information from the phone, IDC ..